Draytek Vigor2862 Series User Manual page 171

When you finish the configuration, please click OK to save and exit this page.
Vigor2862 Series User's Guide
Use LAN Port – Specify an IP for IP Route Subnet. If it is
enabled, DHCP server will assign IP address automatically for
the clients coming from P1 and/or P2. Please check the box
of P1 and P2.
Use MAC Address - Check such box to specify MAC address.
 MAC Address: Enter the MAC Address of the host one by
one and click Add to create a list of hosts which can be
assigned, deleted or edited from above pool. Set a list
of MAC Address for 2
assign the correct IP address of the correct subnet to
the correct host. So those hosts in 2
an IP address belonging to 1
Add – Type the MAC address in the boxes and click this button
to add.
Delete – Click it to delete the selected MAC address.
Edit – Click it to edit the selected MAC address.
Cancel – Click it to cancel the job of adding, deleting and
editing.
nd
DHCP server will help router to
nd
subnet won't get
st
subnet.
155