Draytek Vigor2862 Series User Manual page 96

MAC Address
After finished the above settings, click OK to save the settings.
I I - 1 - 2 - 2 D
I I - 1 - 2 - 2 D
V D S L 2 )
V D S L 2 )
MPoA is a specification that enables ATM services to be integrated with existing LANs, which
use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow different
LANs to send packets to each other via an ATM backbone.
To use MPoA/Static or Dynamic IP as the accessing protocol of the Internet, select
MPoA/Static or Dynamic IP from the WAN>>Internet Access >>WAN1 page. The following
web page will appear.
Available settings are explained as follows:
80
into Internet.
Note: To have PPPoA Pass-through, please choose PPPoA
protocol and check the box(es) here. The router will behave
like a modem which only serves the PPPoE client on the LAN.
That's, the router will offer PPPoA dial-up connection.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the router
manually.
e t a i l s P a g e f o r M P o
e t a i l s P a g e f o r M P o
A / S t a t i c o r D y n a m i c
A / S t a t i c o r D y n a m i c
I P i n W A N 1 ( P h y s i c
I P i n W A N 1 ( P h y s i c
Vigor2862 Series User's Guide
a l M o d e :
a l M o d e :