Draytek Vigor2862 Series User Manual page 736

Available settings are explained as follows:
Item
Enable
Refresh
Clear
Syslog Type
Display Mode
Time
Message
720
Description
Check the box to enable such function.
Click it to update current page.
Click it to remove all of the records.
Specify RADIUS, 802.1X or All to display related authentication
information log.
Choose the mode you want to display the related information
on the following table.
 Stop record when fulls – When the capacity of CVM log is
full, the system will stop recording.
Always record the new event – only the newest events

will be recorded by the system.
Display the time the user authenticated by Vigor2862 series.
Display authentication information done by Vigor2862 series.
Vigor2862 Series User's Guide