Draytek Vigor2862 Series User Manual page 956

wl_dual wds show
wl_dual wds mac add [index addr]
wl_dual wds mac clear/disable/enable [index/all]
wl_dual wds flush
S y n t a x
S y n t a x
Parameter
mode [value]
security [value]
ap [value]
hello [value]
status
show
mac add [index addr]
mac clear/disable/enable
[index/all]
flush
E x a m p l
E x a m p
> wl_dual wds status
Please enable WDS hello function first.
> wl_dual wds hello 1
% <Note> Please restart router after you set the parameters.
> wl dual wds mode b
> wl dual wds security wep
940
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to specify connection mode for WDS.
[value]: Available settings are :
d: Disable
b: Bridge
r: Repeapter
It means to configure security mode with encrypted keys for WDS.
mode: Available settings are:
disable:
wep:
wpapsk [key]:
wpa2psk [key]:
key: Moreover, you have to add keys for wpapsk, wpa2psk, and wep,
and specify index number of schedule profiles to be followed by the
wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26 Hexadecimal
digit format; WPA keys must be in 8~63 ASCII text string or 64
Hexadecimal digit format.
e.g.,
It means to enable or disable the AP function.
Value:
It means to send hello message to remote end (peer).
Value:
It means to display WDS link status for 5GHz connection.
It means to display current WDS settings.
add [index addr] – Add the peer MAC entry in Repeater/Bridge WDS
MAC table.
clear/disable/enable [index/all]- Clear, disable, enable the
specifed or all MAC entries in Repeater/Bridge WDS MAC table. e.g,
It means to reset all WDS setting.
e
l e
No security.
WEP
WPA/PSK
WPA2/PSK
wl_dual wds security disable
wl_dual wds security wep 12345
wl_dual wds security wpa2psk 12345678
1 – enable the function.
0 – disable the function.
1 – enable the function.
0 – disable the function.
wl_dual wds mac enable 1
Vigor2862 Series User's Guide