Draytek Vigor2862 Series User Manual page 287

After finishing the above configurations, PC or Server that connects to Port 5 or Port 6 with IP
settings as IP 211.100.200.154/ mask 255.255.255.252/ Gateway IP 211.100.200.153 will be
able to access Internet through Vigor Router.
T r o u b l e -
T r o u b l e -
If PC with public IP address setting cannot access Internet after above configuration, please
check:


If none of the above helps, please change the host's Gateway IP from Vigor Router's IP
(211.100.200.153) to the IP Gateway IP (211.100.200.158), and connect the PC to the ISP
Modem directly and see if it can work.
Vigor2862 Series User's Guide
s h o o t i n g
s h o o t i n g
If the public IP address has been used by another device.
If the router's WAN Access Mode is "Static or Dynamic IP", make sure the subnet
mask of WAN interface is larger than that of LAN interface.
271