Draytek Vigor2862 Series User Manual page 417

(d)
(e)
(f)
(g)
In IKE advanced settings,
(h)
(i)
(j)
3. In TCP/IP Network Settings, enter VPN Server's LAN Network in Remote Network IP and
Remote Network Mask. Click OK to save the profile.
Vigor2862 Series User's Guide
Select IPsec Tunnel for Type of Sever I am Calling.
Enter VPN Server's WAN IP or domain name in Sever IP/Host Name for VPN.
Click IKE Pre-Shared Key and enter the same Pre-Shared key as VPN Server.
Click on Advanced in IPsec Security Method.
Select Main Mode for IKE phase 1 mode.
Make sure phase 1 and phase 2 proposal are using the security methods which are
accepted by VPN server.
Click OK to save.
401