Draytek Vigor2862 Series User Manual page 640

V I I - 6 - 7 T
V I I - 6 - 7
Many VigorAP and Vigor router can be installed with temperature sensor. If VigorAP (e.g.,
VigorAP 910C) is managed under Vigor router (e.g, Vigor2862), then Vigor router can obtain
the temperature change graph of the USB temperature sensor installed onto VigorAP.
This page displays data including current temperature, maximum temperature, minimum
temperature and average temperature.
V I I - 6 - 8 R
V I I - 6 - 8
It displays the access point scanned by Vigor router. In which, the APs will be classified with
friendly APs, rogue APs and unknown APs in different colors.
Available settings are explained as follows:
Item
Enable
624
e m p e r a t u r e S e n
T e m p e r a t u r e S e
o g u e A P D e t e c
R o g u e A P D e t e c
Description
Neighbor AP Detection – The access point(s) registered to
Vigor2862 will be used to detect other access points and send
the scanned results to Vigor2862. Later, the scanned result
will be displayed on this page.
Local WLAN Detection – The router will detect all the access
s o r
n s o r
t i o n
t i o n
Vigor2862 Series User's Guide