Draytek Vigor2862 Series User Manual page 19

LED on Connector
LAN
P1~P4
P5 /
WAN2
Interface
Factory Reset
DSL / DSL 1/2
LAN P1~P4
P5 / WAN2
USB 1~2
PWR
ON/OFF
Vigor2862 Series User's Guide
Off
Blinking
Left On
LED
Off
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
Switch on Rear Side
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecter for accessing the Internet.
Connecters for local network devices.
Connecter for local network devices or modem for accessing Internet.
Connecter for a USB device (for 3G/4G USB Modem or printer or
thermometer).
Connecter for a power adapter.
Power Switch.
The DMZ function is disabled.
The data is transmitting.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
(Available for Vigor2862L)
3