Ii-1-2-10 Details Page For 3G/4G Usb Modem (Dhcp Mode) In Wan3/Wan4 - Draytek Vigor2862 Series User Manual

After finishing all the settings here, please click OK to activate them.
I I - 1 - 2 - 1 0
I I - 1 - 2 - 1 0
To use 3G/4G USB Modem (DHCP mode) as the accessing protocol of the internet, please
choose Internet Access from WAN menu. Then, select 3G/4G USB Modem (DHCP mode) for
WAN3/WAN4. The following web page will be shown.
Available settings are explained as follows:
Item
104
Mode – Choose PPP Detect or Ping Detect for the system to
execute for WAN detection. If you choose Ping Detect as the
detection mode, you have to type required settings for the
following items.





D e t a i l s P a g e f o r 3 G
D e t a i l s P a g e f o r 3 G
Description
Primary/Secondary Ping IP – If you choose Ping Detect as
detection mode, you have to type Primary or Secondary IP
address in this field for pinging.
Ping Gateway IP – If you choose Ping Detect as detection
mode, you also can enable this setting to use current WAN
gateway IP address for pinging.
With the IP address(es) pinging, Vigor router can check if
the WAN connection is on or off.
TTL (Time to Live) – Set TTL value of PING operation.
Ping Interval – Type the interval for the system to
execute the PING operation.
Ping Retry – Type the number of times that the system is
allowed to execute the PING operation before WAN
disconnection is judged.
/ 4 G U S B M o d e m ( D
/ 4 G U S B M o d e m ( D
H C P m o d e ) i n W A N
H C P m o d e ) i n W A N
Vigor2862 Series User's Guide
3 / W A N 4
3 / W A N 4