Draytek Vigor2862 Series User Manual page 518

CVM Access Control
AP Management
Device Management
After finished the above settings, click OK to save the configuration.
F o r I P v 6
F o r I P v 6
Available settings are explained as follows:
Item
Management Access
502
function of SSL 3.0/1.0/1.1/1.2 if required.
Due to security consideration, the built-in HTTPS and SSL
VPN server of the router had upgraded to TLS1.x protocol. If
you are using old browser(eg. IE6.0) or old SmartVPN Client,
you may still need to enable SSL 3.0 to make sure you can
connect, however, it's not recommended.
CVM Port – Check the box to enable such port setting.
CVM SSL Port – Check the box to enable such port setting.
Enable AP Management – Check it to enable the function of
Central Management>>AP. If unchecked, menu items
related to Central Management>>AP will be hidden.
Check the box to enable the device management function for
Vigor2862.
Respond to external device – If it is enabled, Vigor2862 will
be regarded as slave device. When the external device
(master device) sends request packet to Vigor2862,
Vigor2862 would send back information to respond the
request coming from the external device which is able to
manage Vigor2862.
Description
Allow management from the Internet - Enable the checkbox
Vigor2862 Series User's Guide