Draytek Vigor2862 Series User Manual page 834

E x a m p l
E x a m p
> msubnet status 2
% LAN2
% DHCP server: Off
% Dhcp Gateway: 0.0.0.0, Start IP: 0.0.0.10, Pool Count: 50
T T e e l l n n e e t t C C o o m m m m
This command allows you to enable or disable DHCP server for the subnet.
S y n t a x
S y n t a x
msubnet dhcps [2/3/4/5/6][On/Off]
S y n t a x
S y n t a x
Parameter
2/3/4/5/6
On/Off
E x a m p l
E x a m p
> msubnet dhcps 3 off
% LAN3
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
T e l n e t C o m m
T e l n e t C o m m
This command is used to configure the subnet for NAT or Routing usage.
S y n t a x
S y n t a x
msubnet nat [2/3/4/5/6] [On/Off]
S y n t a x
S y n t a x
Parameter
2/3/4/5/6
818
3=LAN3
4=LAN4
5=LAN5
6=LAN6
e
l e
Off: 0.0.0.0/0.0.0.0, PPP Start IP: 0.0.0.60
a a n n d d : : m m s s u u b b n n e e t t d d h h
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
On means enabling the DHCP server for the specified LAN interface.
Off means disabling the DHCP server.
e
l e
Subnet DHCP Server disabled!
a n d : m s u b n e t n a
a n d : m s u b n e t n a
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
c c p p s s
t
t
Vigor2862 Series User's Guide