Draytek Vigor2862 Series User Manual page 285

c. Set up DHCP IP pool, enable Use MAC Address, add the host's MAC address to the
After finishing above configurations, host with a public IP 211.100.200.154/ mask
255.255.255.248/ Gateway IP 211.100.200.153 will be able to access Internet through Vigor
Router.
R o u t i n g
R o u t i n g
We may also create a LAN subnet for routing usage. Here we take LAN 2 for example.
1. Go to LAN >> VLAN,
a. Enable VLAN Configuration.
b. Set up a VLAN for LAN2 Subnet.
c. Specify the LAN ports that belongs to LAN2 subnet (which is port 5 and 6 in this
Vigor2862 Series User's Guide
table, and connect the host to the router from any of the LAN ports.
U s a g e L A N
U s a g e L A N
example), note that these are the ports to which the host should connect.
269