Draytek Vigor2862 Series User Manual page 174

end address for IPv6 server.
Advance setting – Click the Edit button to configure
advanced IPv6 settings for DHCPv6 server.
Advance setting The Advanced Settings page has additional settings for
Router Advertisement and enabling multiple WANs for IPv6
traffic.
Router Advertisement Configuration – Click Enable to
enable router advertisement server. The router
advertisement daemon sends Router Advertisement
messages, specified by RFC 2461, to a local Ethernet LAN
periodically and when requested by a node sending a Router
Solicitation message. These messages are required for IPv6
stateless auto-configuration.
Disable – Click it to disable router advertisement server.
Hop Limt – The value is required for the device behind the
router when IPv6 is in use.
Min/Max Interval Time (sec) – It defines the interval
(between minimum time and maximum time) for sending RA
(Router Advertisement) packets.
Default Lifetime (sec) –Within such period of time, Vigor
router can be treated as the default gateway.
Default Preference – It determines the priority of the host
behind the router when RA (Router Advertisement) packets
are transmitted.
MTU – It means Max Transmit Unit for packet. If Auto is
158 Vigor2862 Series User's Guide