I-1-1 Indicators And Connectors; I-1-1-1 Vigor2862 / Vigor2862B / Vigor2862L - Draytek Vigor2862 Series User Manual

I - 1 - 1 I n d
I - 1 - 1 I n d
Before you use the Vigor router, please get acquainted with the LED indicators and
connectors first.
I - 1 - 1 - 1 V
I - 1 - 1 - 1 V
LED
ACT (Activity)
WAN2
QoS
USB1~2 / USB
DSL/DSL 1/2
WCF
LTE
VPN
DMZ
2
i c a t o r s a n d C o n
i c a t o r s a n d C o n
i g o r 2 8 6 2 / V i g o r 2 8 6
i g o r 2 8 6 2 / V i g o r 2 8 6
Status
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
On
n e c t o r s
n e c t o r s
2 B / V i g o r 2 8 6 2 L
2 B / V i g o r 2 8 6 2 L
Explanation
The router is powered off.
The router is powered on and running normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The router is ready to access Internet through DSL link.
Slowly: The DSL connection is ready.
Quickly: The DSL connection is establishing.
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
WCF is disabled.
LTE device is connected and ready for use.
LTE device is not detected, or has serious problem
(e.g., no SIM card, SIM pin error, SIM deactivated, and
etc.).
Slowly: LTE device is in dialing up.
Quickly: The data is transmitting.
The VPN tunnel is active.
VPN services are disabled
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
Vigor2862 Series User's Guide