Draytek Vigor2862 Series User Manual page 65

4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system
status of this protocol will be shown.
5. Now, you can enjoy surfing on the Internet.
W i r e l e s s
W i r e l e s s
1. Choose WAN2 as the WAN Interface and choose Wireless (2.4G) as the Physical Mode.
Click the Next button. The following page will be open for you to specify Internet Access
Type.
2. Click Static IP as the Internet Access Type. Simply click Next to continue.
Available settings are explained as follows:
Item
WAN IP
Vigor2862 Series User's Guide
( 2 . 4 G ) W A N 2 - S t a t i c
( 2 . 4 G ) W A N 2 - S t a t i c
Description
Type the IP address.
I P
I P
49