Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

New Information for Firmware Release 11.0
Table 4: Cisco IP Phone 8800 Administration Guide Revisions for Firmware Release 11.0
Revision
Updated for clarification and to address deficiencies
Updated for improved Sectional phone debug option
support
Updated for improved EAP-TLS + SCEP,
PEAP-GTC, and X.509 digital certificates support
Updated for improved Problem Report Tool(PRT)
support
Added for View All Calls on Primary Line support
Added for Application Dial Rule support
Added for Line Text Label

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

4
New and Changed Information
Updated Section
• VPN Configuration, on page 188
• Set Up IPv6, on page 56
• Set Up Energy Efficient Ethernet for Switch
and PC Port, on page 164
• Video Transmit Resolution Setup, on page 193
• Enhanced Survivable Remote Site Telephony,
on page 77
• Control Debug Information from Cisco Unified
Communications Manager, on page
• WLAN Security, on page
• Set Up Authentication Mode, on page 96
• Wireless Security Credentials, on page 96
• Problem Report Tool, on page
• Configure a Customer Support Upload URL,
on page 171.
• View All Calls on Primary
• Application Dial Rules, on page 78
• Set the Label for a Line, on page
252.
93.
171.
Line.
172.