Verifying Phone Startup - Cisco SPA 504g User Manual

Verifying Phone Startup

After receiving power and network connectivity, the phone executes a boot-up sequence. During this
sequence, phones with screens display the Cisco logo and then Initializing Network. All of the lights
on the phone flash.
After your phone is successfully connected to the network and receives a basic configuration, your
phone line keys should glow green (on models with phone line keys).
On models with screens, the phone displays the standard menu for the phone. The date, name and
number of the phone display on the top line of the IP phone screen. At the bottom of the IP phone screen,
softkeys are displayed over their associated soft buttons.
If the phone does not start, confirm your installation and connections. If these are correct, try
unplugging the phone and plugging it back in again. If you still do not see the display, contact your
phone administrator or Internet Telephony Service Provider (ITSP).
23