Configure Busy Lamp Field With Other Features - Cisco 6800 Series Administration Manual

Configure Busy Lamp Field with Other Features

• usr/ext=the user that the busy lamp field monitors. yyyy is user id of the phone that the busy lamp field
Step 5 (Optional) You can configure the busy lamp field to work with any combination of speed dial or call pickup.
To enable the busy lamp field to work with speed dial or call pickup, enter a string in the following format in
the Extended Function field:
fnc=blf+sd+cp;sub=xxxx@$PROXY;usr=yyyy@$PROXY
Where:
sd= speed dial
cp= call pickup
Step 6 Click Submit All Changes.
Configure Busy Lamp Field with Other Features
You can configure busy lamp field to work with other features on your key expansion module, such as speed
dial, and call pickup. Use the information in the following table as a guide when selecting the correct string
format.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Att Console.
Step 2
Select a key expansion module line key.
Step 3 Enter a string in the appropriate format.
Feature
Busy Lamp Field and Speed
Dial
Busy Lamp Field, Speed Dial,
and Call Pickup
Busy Lamp Field, Speed Dial,
and Park Notification
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
164
monitors. Replace yyyy with the exact user id of the monitored phone. $PROXY is the server. Replace
$PROXY with the server address or name.
String Format
fnc=blf+sd;sub=xxx@proxy;ext=monitored userID@proxy
fnc=blf+sd+cp;sub=xxx@proxy;ext=monitored userID@proxy
fnc=blf+sd;sub=xxx@proxy;ext=monitored userID@proxy
This combination cannot be configured using the extended function. This combination is supported
on Broadsoft servers only and it is configured using the BLF List and related configuration on the
server.
.
Access the Phone Web Page, on page
.
.
.
Phone Administration
92.