Xml Directory; Call A Contact In Your Xml Directory - Cisco 7800 Series User Manual

XML Directory

Step 5
In the Company directory (LDAP) address entry screen, use the outer ring of the navigation cluster to scroll
through the details.
You can find that certain attributes display multiple times in the entry details, and each attribute contains a
contact number.
Step 6
Highlight a contact number, and press Edit call.
The Edit call softkey displays only for the contact numbers that are available to edit.
Step 7 Edit the number as necessary.
Step 8 Press Call.
XML Directory
Your phone can retrieve the contacts from the XML directory service or application after your administrator
configures the XML directory in your phone. In this way, you can view and call the contacts in your XML
directory. Typically, your phone can display up to 200 contacts (or entries) in your XML directory.

Call a Contact in Your XML Directory

Before you begin
Your administrator has configured the XML directory.
Procedure
Step 1 Press Contacts
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select the XML directory.
By default, the directory name is "Corporate directory (XML)".
Step 4
In the Directories screen, use the outer ring of the navigation cluster to highlight an entry.
The phone displays an entry together with one or more contact numbers.
Step 5 Press Call.
Note
Step 6
Press the Select button of the Navigation Cluster to view details of the highlighted entry.
Step 7 In the Corporate directory (XML) address entry screen, use the outer ring of the navigation cluster to scroll
through the details.
An entry can contain up to 5 contact numbers.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
76
.
For the entry that contains multiple contact numbers, your phone always selects the first contact
number to dial out. If you want to call the other contact numbers of the entry, proceed with the next
steps. Otherwise, skip the remaining steps.
Contacts