Installing A Desk Stand (Optional); Mounting A Phone To A Wall (Optional) - Cisco UC320W Administration Manual

Installing a Desk Stand (Optional)

NOTE
STEP 1
STEP 2

Mounting a Phone to a Wall (Optional)

NOTE
5. Phone port: Use this port to connect the phone cord for the handset. Connect
the other end of the phone cord into port on the bottom of the handset (not
shown).
6. Power port: Use this port to connect the supplied power cord. Note: This phone
can receive power over Ethernet only if a Cisco POES5 5-Volt Power Over
Ethernet Splitter accessory is connected.
7. Side car Attachment features (not illustrated): See
Consoles, page 75.
A desk stand is provided with each Cisco IP phone. The stand can be easily
attached or removed.
• Do not attach the desk stand if you want to mount the phone to the wall. See
Mounting a Phone to a Wall (Optional), page
• If you plan to attach a Cisco SPA500S attendant console, attach it before
attaching the desk stand. See
Connect the phone stand by lining up the tabs on the stand with the slots on the
phone body.
Slide the bottom tabs into the lower slots on the phone body and lightly press
down on the stand. It should easily slide into the upper stand slots. Do not force.
This procedure requires an MB100 wall mount bracket kit (sold separately).
Connecting Attendant
66.
Connecting Attendant Consoles, page 75.
66