•
BODY
•
Front Door Lock Actuator Test
Rear Door Lock Actuator Test
1. Remove the front door panel (see page 20-8).
2. Disconnect the 2P connector f r o m the actuator.
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
\^
Terminal
1
2
P o s i t i o n
\
1
2
L O C K
©
0
U N L O C K
©
4. If the actuator does not operate as specified,
replace it.
1. Remove the rear door panel (see page 20-8).
2. Disconnect the 2P connector f r o m the actuator.
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
\ ^
T e r m i n a l
P o s i t i o n
\ ^
1
2
L O C K
©
©
U N L O C K
©
©
4. If the actuator does not operate as specified,
replace it.
22-225