•
BODY
•
Switch Test
1. Remove the center console (see page 20-83).
2. Disconnect the 6P connector (A) from the switch (B),
and remove the switch from the console tray.
3. Check for continuity between the terminals in each
switch position according to the table.
\
T e r m i n a l
P o s i t i o n
\
1
2
3
6
4
5
O N
H I G H
o -
- © •
o
r\
O N
H I G H
o -
- © •
o
o
•@-
o o
O N
L O W
a
p
a
-©-
o
o
O F F
o-
-<&-
o
4. If the continuity is not as specified, replace the
switch.
Seat Heater Test
1. Carefully remove the driver's and passenger's seat
(see page 20-99).
2. Check for continuity in the driver's seat heater
between the No. 1 and No. 2 terminals, and No. 1
and No. 3 terminals.
There should be continuity.
T e r m i n a l s i d e o f
m a l e t e r m i n a l s
3. Check for continuity in the passenger's seat heater
between the No. 3 the No. 2 terminals, and No. 3
and No. 1 terminals. There should be continuity.
4. If the continuity is not as specified, replace the
heater.
22-201