Intermediate Shaft Removal; Intermediate Shaft Disassembly - Honda Accord 2008 Manual

07/11/02 09:17:29 61TA0000_160_0022
Driveline/Axle

Intermediate Shaft Removal

1. Drain the transmission fluid. Reinstall the drain
plug using a new sealing washer:
• Manual transmission (see page 13-5)
• Automatic transmission (see page 14-242)
2. Remove the right driveshaft (see page 16-4).
3. Remove the flange bolt (A) and two dowel bolts (B).
＊０１
B
4. Remove the intermediate shaft (A) from the
differential. Hold the intermediate shaft horizontal
until it is clear of the differential to prevent
damaging the differential oil seal (B).
＊０２
B
16-22 16-22
ＴＡ０８ＡＥ４Ｅ１６２３６５０００００ＫＡＡＴ００

Intermediate Shaft Disassembly

Special Tools Required
• Half shaft base 07NAF-SR30101
• Oil seal driver 07947-SB00100
1. Remove the heat shield bolts (A) and heat shield.
A
2. Remove the set ring (A), the outer seal (B), and the
external snap ring (C).
A
ＴＡ０８ＡＥ４Ｅ１６２３６５０００００ＬＣＡＴ００
A
C
A
B
＊０１
＊０２