Functions Of The Service Center - Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and restoring data

5.3 Functions of the Service Center

5.3 Functions of the Service Center
Overview
In the upper section of the Service Center main menu, you can select one of three tasks.
Buttons for additional functions are available in the lower section.
Figure 5-1
Table 5- 1 Functions in the main menu of the Service Center
Element of the window
Disk Backup
Disk Restore
Log Files
About
Shell
Network
Reboot
Shutdown
58
Service Center - Main menu
Purpose
For creating a disk image of the local SSD.
For restoring an existing disk image.
Viewing and saving log files.
Viewing information about the Service Center.
Opens the prompt.
Here you can enter commands for executing tasks on the PCU without using a graphical user interface.
Making network settings.
Any network settings you make in this dialog box are temporary. To change network settings
permanently, switch to the Service Desktop.
Restarts the PCU
Shuts down the PCU.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
PCU Base Software (IM10)