"C"
"A"
"B"
"D"
"G"
"E"
"I"
"F"
"H"
Radiator Cooling Fan Assembly Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect connectors (1) of cooling fan motors.
1
1
3
2
"B"
"A"
"D"
"C"
"I"
"H"
"G"
"F"
"E"
I5JB0A161017-01
S5JB0A1606021
I5JB0A161014-01
Engine Cooling System:
3) With hose connected, detach P/S fluid reservoir with
reservoir bracket.
4) Remove air cleaner case and air cleaner suction
pipe (2).
5) Remove reservoir (1) from radiator.
6) Remove cooling fan assembly.
Installation
Reverse removal procedure for installation noting the
following.
• Refill cooling system referring to Step 7) to 17) of
"Cooling System Flush and Refill: ".
• After installation, verify there is no coolant leakage at
each connection.
Radiator On-Vehicle Inspection and Cleaning
Inspection
Check radiator for leakage or damage. Straighten bent
fins, if any.
Cleaning
Clean frontal area of radiator cores.
1F-11
1
2
I5JB0A161015-01
S5JB0A1606013
I2RH01160014-01