Selecting Video Sources; Hiding The Local Video - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
In addition to the six layout icons shown in the preceding figure, you may see the icon for the
local or remote presentation if:
l
l
The icon for the local presentation disappears if the local presentation source is disconnected
from the TE30. The icon for the remote presentation disappears if the remote presentation sharing
stops.
Before a conference starts, you can set the position of the PiP window on the screen. For details,
see

8.5 Selecting Video Sources

You can specify video input ports for the local video, local presentation, and remote video.
Selecting the Local Video Source
Step 1 Press
Step 2 Press
local video source.
----End
Selecting the Local Presentation Source
Select
Selecting the Remote Video Source
During a conference, you can select a remote video source to view this remote video.
Step 1 Press
Step 2 Press
remote video source.
----End

8.6 Hiding the Local Video

During a conference, you can hide the video of your site if you do not want the video to be seen
by remote sites. When this function is enabled, the video of your site is displayed as a blue screen
at remote sites.
Background
The TE30 is in use during a conference.
Issue 01 (2013-03-27)
A presentation source is connected to your site. When this happens, the icon for the local
presentation is displayed.
Your site receives a presentation shared by a remote site. When this happens, the icon for
the remote presentation is displayed.
Table 4-4.
on the remote control to switch to the local video mode.
on the remote control. In the lower right corner of the screen, select a video feed as the
from the option bar. Then specify a video feed as the local presentation source.
on the remote control to switch to the remote video mode.
on the remote control. In the lower right corner of the screen, select a video feed as the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Video and Audio
78