Huawei TE30 User Manual page 22

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Dialing
mode
Connection
type
Local IP
address
and
Subnet mask
Gateway
address
Issue 01 (2013-03-27)
Description
Specifies the dial-up connection mode.
The dial-up process complies with the
Point-to-Point Protocol over Ethernet
(PPPoE) protocol. To use a dial-up
connection, enter the user name and
password provided by your broadband
access service provider in User name and
Password.
l Auto: When your TE30 starts, it
automatically sets up a dial-up
connection over the IP network. If the
dial-up service is not free of charge,
charging starts when the dial-up
connection is set up.
l Manual: Your TE30 uses the dial-up
program to access a network. To set up
a PPPoE dial-up connection, you must
choose Advanced Settings >
Utilities > PPPoE Dialing >
Connect.
Specifies the mode in which your TE30
obtains an IP address.
l Static IP: The network administrator
assigns an IP address to your TE30. If
you select this option, you must also set
Local IP address, Subnet mask, and
Gateway address.
l Dynamic IP: When a DHCP server is
available on the network, your TE30
automatically obtains an IP address
using the Dynamic Host Configuration
Protocol (DHCP).
Specify the IP address and subnet mask of
your TE30.
Specifies the gateway address that
corresponds to the IP address of your
TE30.
This parameter is mandatory only when
Connection type is set to Static IP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is Auto.
The default value is Static IP.
If you have set NMS server,
select Static IP for this
parameter.
Contact the network
administrator.
Examples:
l IPv4 address: 192.168.1.10
l IPv6 address:
2000:0:0:0:200:55:26:1
Contact the network
administrator.
Examples:
l IPv4 address: 192.168.1.1
l IPv6 address:
2000:0:0:0:200:55:0:1
3 Network
14