Huawei TE30 User Manual page 55

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Call times
Default call
bandwidth
Step 2 Select Save.
----End
Setting Advanced Conference Parameters
Step 1 Choose Advanced Settings > Settings > Conference > Advanced. Set the advanced conference
parameters by referring to
Table 6-2 Advanced conference parameters
Parameter
Audio protocol
Audio and video
protocols
Issue 01 (2013-03-27)
Description
Specifies the maximum number of
attempts your TE30 calls a specified
site after startup.
Specifies the default data
transmission rate for your TE30.
NOTE
If this parameter is set incorrectly, the
video quality is affected, or the call
might even fail to be set up.
Table 6-2.
Description
Specifies the audio protocol your
TE30 uses to encode audio.
Specifies the audio and video
protocol capability of your TE30.
Using the audio or video protocol
that you select, your TE30
negotiates the audio or video
capability with a remote endpoint to
set up a call.
If you do not select an audio or
video protocol under Audio and
Video Protocols, you cannot select
that protocol for Video protocol, H.
239 video protocol, or Audio
protocol.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is 1.
The maximum value is 10.
If you set this parameter to 0, your
TE30 does not call the specified site
after startup.
The default value is 1920kbps.
Setting
The default value is Auto.
All protocols are selected by
default.
6 Conference
47