Huawei TE30 User Manual page 40

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Stretch mode
Automatic
layout mode
Small window
position
Step 4 Select Save.
----End
Issue 01 (2013-03-27)
Description
Specifies how to adjust the aspect ratio to fit
the video into the screen.
l Stretch: The aspect ratio is changeable.
l No stretch: The aspect ratio is not
changeable.
l Intelligent stretch: Your TE30 crops the
video to an appropriate size and stretches
the video to full screen while maintaining
the original aspect ratio. For example, to
change a wide-screen video to a narrow-
screen video, your TE30 crops the left
and right edges of the wide-screen video
and stretches the video to full screen.
Specifies the display mode for the
presentation and video.
NOTE
This parameter applies only to the main output
port.
l Full screen: Your TE30 displays the
video or presentation in full screen in the
following priority sequence: remote
presentation, local presentation, remote
video, and local video.
l PiP: The Picture in Picture (PiP) function
is enabled to display the presentation and
video.
l 2 panes: The presentation and video are
displayed in two panes.
l 3 panes (a) or 3 panes (b): The
presentation and video are displayed in
three panes.
Specifies the position of the PiP window on
the screen.
This parameter is available only when
Automatic layout mode is set to PiP.
NOTE
This parameter applies only to the main output
port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Display and Camera
Setting
The default value is
Stretch.
The default value is Full
screen.
The default value is Lower
right corner.
32