Huawei TE30 User Manual page 38

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Video
Resolution
1080p
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Common Settings > Video Output. Set the
common video output parameters by referring to
Table 4-3 Common video output parameters
Parameter
GUI
Caption output
Main output
interface
Dual-screen
Step 2 Select Save.
Step 3 Choose Advanced Settings > Settings > Video > Video Output. Set the advanced video output
parameters by referring to
Issue 01 (2013-03-27)
Refresh Rate (Hz)
l 60 if the output mode is VGA
l 24, 25, 30, 50, or 60 if the output mode is DVI, YPrPb, or HDMI
Description
Specifies the video output port for
the remote controlled UI.
During a conference, you can
configure your TE30 to display
video on one monitor and the
remote controlled UI on another
monitor by setting this parameter
to a value different from the
MAIN OUT HD value.
Specifies the video output port for
captions.
NOTE
This parameter takes effect only
when the caption type is set to T.140.
Specifies the main output port.
Only the main output port
supports combined picture output.
For details about the combined
picture function, see
Adjusting the Screen
Specifies whether the TE30
displays the video and
presentation on separate displays.
You can enable this function only
when your TE30 is connected to
two displays.
Table 4-4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 4-3.
Setting
The default value is MAIN OUT
HD.
The default value is MAIN OUT
HD.
The default value is MAIN OUT
HD.
To ensure video quality, retain the
default value.
8.4
Layout.
The default value is Disable.
4 Display and Camera
30