Selecting And Controlling A Camera; Switching Between Local Video Sources - Huawei TE40 User Manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide

8.1 Selecting and Controlling a Camera

Select local and remote video sources and control the local and remote cameras to obtain the
desired view.

8.1.1 Switching Between Local Video Sources

If you have connected multiple video source devices (such as cameras, DVD players, and
computers) to the video input ports, you can switch between the video input ports to choose the
local video source.
Background
Remote sites receive the video output that, by default, is from a camera connected to the HD-
VI port.
When the endpoint is not in use during a conference, you can only select and control the local
camera. When the endpoint is in use during a conference, you can select and control the local
and remote cameras.
Prerequisites
l
l
Selecting a Camera
Before controlling a camera that is not the local or remote video source, you must select the
camera.
Press
corner on the screen.
Selecting and Controlling Multi-View
Two more channels of local video input are combined into one video channel to form a combined
image, which is sent to the remote endpoint. The combined image can be composed of the images
captured from camera inputs and computer desktop. It supports dynamic configuration, that is,
modes and parameters can be configured during the conference and are effective immediately.
Issue 02 (2014-01-15)
Video source management has been enabled as follows: Choose Advanced > Settings >
Video > Common Settings and select Video Source Management.
NOTE
Access to the Settings menu may require a password, which you can obtain from the system
administrator.
You have configured serial ports for the video sources (such as cameras). You can configure
serial ports for up to two video sources. For details about the configuration, see the
"Configuring Video Input" section in the HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint V100R001C01 Administrator Guide.
on the remote control to toggle between the local or remote camera. and then press
on the remote control and select the desired camera from the list displayed in the lower right
NOTE
The text in the upper left corner indicates the camera that is currently being controlled (local or remote).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Controlling What You See
36