Setting Firewall Parameters - Huawei TE30 User Manual

Videoconferencing endpoint
Hide thumbs Also See for TE30:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide

3.6 Setting Firewall Parameters

With the firewall settings correctly configured, video conferences held using your TE30 are
secure.
Background
The firewall protects your IP network by separating the internal and external network
communication data.
With Network Address Translation (NAT) technology, a device on a local area network (LAN)
is allocated with a dedicated internal IP address and uses an external IP address to communicate
with external devices. If your LAN uses NAT technology, set the IP address of the NAT wide
area network (WAN) on your TE30.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > Firewall. Set the firewall parameters by
referring to
Table 3-6 Firewall parameters
Parameter
Enable H.
460
Use NAT
NAT address Specifies the public IP address for your
H.323 call
port
RAS source
port
Issue 01 (2013-03-27)
Table
3-6.
Description
Specifies whether to use H.460 to
implement traversal between public and
private networks after your TE30 is
recognized as a private network endpoint.
Specifies whether NAT is enabled to
implement traversal between public and
private networks. An endpoint installed on
a private network is considered as a public
network endpoint after NAT is enabled on
the endpoint.
NOTE
Even if you then enable H.460 on the endpoint,
it is still considered as a public network
endpoint, and H.460 is not used.
TE30. This parameter is mandatory if you
select Use NAT.
Specifies the port a remote site uses to
send and receive call signaling during
communication with your site.
Specifies the port your site uses to send
and receive Registration, Admission and
Status (RAS) signaling during
communication with remote sites.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is deselected by
default.
This parameter is deselected by
default.
No default value is set for this
parameter.
The default value is 1720.
The default value is 1719.
3 Network
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r001

Table of Contents