Huawei TE30 User Manual page 70

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Configuring the FTPS or FTP Network Address Book
Step 1 Choose Advanced Settings > Settings > Network > Network Address Book > Network
Address Book. Set the network address book parameters by referring to
Table 6-5 Network address book parameters
Parameter
Enable network
address book
Synchronize
automatically
FTPS
Local records
prevail if
duplicates exist
Prompt users
during update
Clear local
records during
update
Server address
File path
User name
Password
Step 2 Select Save.
----End
Issue 01 (2013-03-27)
Description
Specifies whether to enable the network
address book. If you enable this function,
set the other parameters listed in this table.
Specifies whether your TE30 automatically
downloads site entries from the network
address book to the local address book.
Specifies whether to use FTPS to encrypt
data through the SSL and ensure data
integrity.
If FTPS is not used, the TE30 uses FTP,
which is insecure.
Specifies whether the following function is
enabled: If some entries in the network
address book on the FPTS or FTP server
already exist in the local address book,
these entries remain unchanged when the
local address book is updated.
Specifies whether a message is displayed to
prompt you to update the local address
book if the versions of the network and
local address books are different. When
you confirm the update, site information in
the network address book is downloaded to
the local address book.
Specifies whether your TE30 automatically
clears the local address book when
updating the local address book.
Specifies the IP address of the server that
stores the network address book.
Specifies the save path to the network
address book on the server.
Specify the user name and password your
TE30 uses to access the network address
book.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Table 6-5.
Setting
The default value is
Disable.
The default value is
Disable.
This parameter is selected by
default.
To improve communication
security, retain the default
value.
The default value is
Disable.
The default value is Enable.
The default value is
Disable.
No default value is set for
this parameter.
No default value is set for
this parameter.
No default value is set for
this parameter.
62