Huawei TE30 User Manual page 30

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Identity
authenticatio
n mode
and
Encryption
mode
Password
Local IP
address
and
Subnet mask
DHCP
Start IP
address
and
End IP
address
Issue 01 (2013-03-27)
Description
The first parameter specifies the identity
authentication mode used on the Wi-Fi
network. The second parameter specifies
the data encryption mode corresponding
to the identity authentication mode
adopted.
l OPEN: If you select this option for
Identity authentication mode, the
values available for Encryption
mode are NONE and WEP.
l SHARE: If you select this option for
Identity authentication mode, the value
available for Encryption mode is
WEP.
l WPA-PSK: If you select this option
for Identity authentication mode, the
values available for Encryption
mode are TKIP and AES.
l WPA2-PSK: If you select this option
for Identity authentication mode, the
values available for Encryption
mode are TKIP and AES.
Specifies the password used by other
devices to connect to your TE30.
Specify the IP address and subnet mask of
your TE30.
Specifies whether your TE30 assigns IP
addresses to devices connected to it.
If you select this parameter, you must also
set Start IP address and End IP
address.
Specify the IP address segment for the
devices connected to your TE30.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
l The default value of Identity
authentication mode is
OPEN.
l The default value of
Encryption mode is
NONE.
NOTE
When the TE30 is connected to a
VPM220, you must set Identity
authentication mode to WPA-
PSK or WPA2-PSK.
The required password varies
depending on your settings of
Encryption mode. If you set
Encryption mode to NONE,
the Wi-Fi network provided by
your TE30 is open to everyone.
Examples:
l Local IP address:
192.168.1.10
l Subnet mask:
255.255.255.0
This parameter is deselected by
default.
Examples:
l Start IP address:
192.168.1.10
l End IP address:
192.168.1.157
3 Network
22