Setting Sip Parameters - Huawei TE30 User Manual

Videoconferencing endpoint
Hide thumbs Also See for TE30:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Password
Huawei GK
HTTPS
mode
Multipoint
conference
authenticatio
n
Use VoIP
gateway
Step 2 Select Save.
----End

3.3 Setting SIP Parameters

To prepare your TE30 for video communication using SIP, set SIP parameters, which include
the parameter specifying whether to register with a SIP server.
Issue 01 (2013-03-27)
Description
Specifies the password your TE30 uses to
register with the GK. The GK uses this
password to authenticate your TE30.
Specifies whether your TE30 registers
with the Huawei GK server.
If this parameter is deselected, some
functions, such as Conference Control,
are unavailable on your TE30.
Specifies whether to upload information
about conferences initiated from your
TE30 in HTTPS encryption mode.
l This parameter is available only when
Huawei GK is selected.
l If you do not select this parameter, the
TE30 will use the Transfer Control
Protocol (TCP) to upload conference
information, which may be insecure.
Specifies whether a certificate for
authentication is required to initiate a
SiteCall conference. For details about
how to import a certificate, see
Importing a
Certificate.
This parameter is available only when
HTTPS mode is selected.
Specifies whether to use a VoIP gateway
and the address of the VoIP gateway. If
you set these two parameters, your TE30
can place calls to PSTN endpoints
connected to the VoIP gateway.
If you select Use VoIP gateway, you must
also set VoIP gateway address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
Obtain the password from your
network service provider.
Ensure that this password is the
same as that predefined on the
GK
This parameter is selected by
default.
Retain the default value when
the TE30 registers with the
Huawei GK server.
This parameter is selected by
default.
To improve communication
security, retain the default value.
This parameter is deselected by
default.
To improve communication
11.4.8
security, select this parameter.
This parameter is deselected by
default.
3 Network
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r001

Table of Contents