Huawei TE30 User Manual page 56

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Video protocol
Video
resolution
Video frame
rate
Video
resolution
Prevent little
packet loss
Issue 01 (2013-03-27)
Description
Specifies the video protocol your
TE30 uses to encode video.
During a non-multi-stream
conference, its video protocol is the
video protocol the TE30 uses at
your site.
l If you select Auto, Video
resolution is available.
l If you do not select Auto, you
must set Video resolution and
Video frame rate.
Specifies the video format. The
available options vary depending
on the Video protocol value.
When Video protocol is set to
Auto, set this parameter to either of
the following:
l Smooth: Your TE30 uses a high
frame rate to ensure smooth
video.
l Sharp: Your TE30 uses a high
video resolution to ensure sharp
video.
Specifies the frame rate used during
video encoding.
Video is smoother at a higher
refresh rate and sharper at a lower
frame rate.
Specifies the video resolution.
l Smooth: Your TE30 uses a high
frame rate to ensure smooth
video.
l Sharp: Your TE30 uses a high
video resolution to ensure sharp
video.
Specifies whether to prevent little
packet loss to avoid artifacts.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is Auto.
The default value is Auto.
The default value is Auto.
It is recommended that you retain
the default value.
The default value is Sharp.
This parameter is deselected by
default.
If all participant endpoints are on
the same private network, select this
parameter.
6 Conference
48