Customizing Onscreen Status Icons - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Noise reduction
Video resolution
Image inversion
VGA IN
Brightness
Contrast
Saturation
Hue

8.1.4 Customizing Onscreen Status Icons

You can customize the status icons to be displayed on screens.
Packet Loss Rate Icon
To set thresholds (A and B) for the packet loss rate, choose Advanced Settings > Settings >
Display > Packet Loss Threshold.
By comparing the packet loss rate on the current network with threshold A and threshold B, the
TE30 determines whether to display the packet loss rate icon on the remote controlled UI. The
policy is as follows:
Issue 01 (2013-03-27)
Description
Removes noise artifacts from
video. A larger value causes the
video to have less noise but detail
may also be lost.
Specifies the video output
resolution for the camera.
Specifies whether the video input
from the camera is rotated by 180
degrees.
If the video is displayed in a
reverse direction, you can enable
this function.
Specifies the video output level
that changes the brightness of the
video displayed on the monitor.
The brightness increases with this
value.
Adjusts color levels to facilitate
the distinction between two
colors.
If the contrast is higher, the
difference between the light and
dark extremes of a color is more
distinct.
Adjusts the grayscale of each
color.
The higher the saturation, the
brighter a color.
Adjusts the video color shade.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Video and Audio
Setting
The default value is Low.
The default value is 1080P
60Hz.
The default value is Disable.
Value range: 0-100
The default value is 50.
Value range: 0-1000
The default value is 500.
Value range: 0-100
The default value is 50.
Value range: 0-360
The default value is 0.
75