Huawei TE30 User Manual page 26

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Prerequisites
All involved parties in the conference support SIP.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > IP > SIP. Set the SIP parameters by
referring to
Table 3-3 SIP parameters
Parameter
Register with
server
Server
address
Conference
service
number
Enable proxy
server
Issue 01 (2013-03-27)
Table 3-3.
Description
Specifies whether to register your TE30
with a SIP server.
l If you select this parameter and the
TE30 successfully registers with the
SIP server, the TE30 can call endpoints
defined in the address book by their IP
addresses, numbers, and names.
l If you do not select this parameter, the
TE30 does not register with any SIP
servers and can call other endpoints
only by their IP addresses.
NOTE
If you select this parameter, you must also set
Server address, Conference service
number, Site number, User name, and
Password.
Specifies the IP address or domain name
of the SIP server with which you want
your TE30 to register.
Specifies the conference service number
for your TE30 to initiate conferences over
an IP multimedia subsystem (IMS)
network.
Set this parameter to the conference
service number obtained from your IMS
network administrator.
NOTE
Born by the standard IP, the IMS uses VoIP
applications based on the 3rd Generation
Partnership Project (3GPP) SIP to provide
fixed and mobile multimedia services for
operators. Integrating multipoint control units
(MCUs) can enhance the functionality of the
Huawei IMS HD videoconferencing solution.
Specifies whether to enable the proxy
server. If you set Server address to the SIP
server domain name, select this parameter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is deselected by
default.
Example: 192.168.1.10
No default value is set for this
parameter.
This parameter is deselected by
default.
3 Network
18