Adjusting Audio Effects - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
l
l
l
Other Icons
A status icon is displayed on screens if the following conditions are met:
l
l

8.2 Adjusting Audio Effects

You can adjust audio effects by modifying the settings for the audio input, sound effects, and
volume.
Background
For details about how to adjust the audio input and volume, see
section only describes how to adjust sound effects.
Procedure
Step 1 Choose Advanced Settings > Settings > Audio > Sound Effect. Set the sound effect parameters
by referring to
Table 8-2 Sound effect parameters
Parameter
Ringtone
Locally output
sound from
AUDIO IN
AUDIO IN
remote output
Bass
Middle
Treble
Issue 01 (2013-03-27)
NOTE
Threshold A must be less than threshold B. Their value ranges are 0.1% to 100%. The default values for
threshold A and threshold B are 1% and 5%, respectively.
If the packet loss rate is less than or equal to threshold A, no packet loss rate icon is
displayed.
If the packet loss rate is between threshold A and threshold B,
If the packet loss rate is greater than or equal to threshold B,
You have set the icon as follows:
Choose Advanced Settings > Settings > Display > Icon and select the icon.
The function that corresponds to the status icon has been enabled.
Table 8-2.
Description
Specifies the ringtone for incoming calls.
Specifies whether to allow the audio input from
the LINE IN port to be heard at your site.
Specifies whether to allow the audio input from
the LINE IN port to be heard at remote sites.
Adjusts the equalizers by moving the sliders.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Video and Audio
is displayed.
is displayed.
5.3 Configuring Audio. This
Setting
The default value is
Default.
This parameter is
deselected by default.
This parameter is
selected by default.
Value range: -6 dB to +6
dB
The default value is
+0dB.
76