Huawei TE30 User Manual page 65

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Figure 6-1 Procedure for joining an authentication conference
l
l
l
l
Procedure
Step 1 Check the necessary resources.
l
l
Step 2 Press
Step 3 Enter the access number of the authentication conference.
Issue 01 (2013-03-27)
Setting the number of anonymous sites: Set the number of anonymous sites when initiating
a conference. For details, see
Setting the authentication conference password: When initiating the conference, set
Conference control password, which functions as the authentication conference
password. Anonymous sites must enter this password to join the conference. If Conference
control password is left blank, anonymous sites can join the conference without entering
any password.
Obtaining the access number of the authentication conference: You can obtain this number
if you request chair control rights after the conference starts. Alternatively, choose
Advanced Settings > Diagnostics > Status > Conference to query the access number.
Anonymous sites can ask the chair site for the access number and authentication conference
password. Nevertheless, they cannot use their endpoints to call the chair site because the
chair site is already in the conference.
Joining the authentication conference as an anonymous site: Anonymous PSTN sites can
join the conference by dialing the audio access number, and anonymous IP sites can join
the conference by dialing the video access number.
At the chair site: Check that the conference has available anonymous site resources, and
you have obtained the audio or video access number of the conference as well as the
authentication conference password.
At your site: Check that the site has registered with the GK or SIP server.
on the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-3.
6 Conference
57