Huawei TE30 User Manual page 27

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Proxy server
address
Site number
User name
and
Password
Server type
Transmissio
n type
Issue 01 (2013-03-27)
Description
Specifies the address of the proxy server.
If you set Server address to the SIP server
domain name, set this parameter to the IP
address bound to that domain name.
Specifies the site number for your TE30.
If your TE30 registers with a SIP server,
endpoints that also register with the SIP
server can dial this site number to call your
TE30.
Specify the name and password by which
a SIP server identifies your TE30 after it
registers with the SIP server.
Specifies the SIP server type.
l OCS: Select this option if your TE30
registers with the Microsoft Office
Communications Server (OCS) or
Microsoft Lync Server.
l CISCO VCS: Select this option if your
TE30 registers with the Cisco
TelePresence Video Communication
Server (VCS).
l Standard: Select this option if your
TE30 registers with any other SIP
servers.
Specifies the protocol used for SIP
signaling transmission.
l TCP: Use the Transmission Control
Protocol (TCP) to implement
transmission reliability.
l UDP: Use the User Datagram Protocol
(UDP) to implement transmission with
reduced latency.
l TLS: Use the Transport Layer Security
(TLS) protocol to implement
transmission security. If you select this
option, you must import a certificate
when your TE30 registers with a SIP
server. For details, see
Importing a Certificate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
Example: 192.168.1.10
The site number can consist of
digits and letters.
Example: 12345
The value can consist of digits,
letters, and special characters,
such as @ # %.
Example: ab3@Joe
The default value is Standard.
The default value is UDP.
11.4.8
3 Network
19