Huawei TE30 User Manual page 17

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Date format
Enable NTP
NTP address
type
NTP server
address
To set the Fan noise parameter, Choose Advanced Settings > Settings > General > Fan
noise。
l
l
To set custom parameters listed in
Display > Personalize.
Issue 01 (2013-03-27)
Description
Specifies the format in which the date is
displayed.
Specifies whether your TE30
automatically synchronizes system time
with a Network Time Protocol (NTP)
server at an interval of 300 seconds.
NOTE
If you set this parameter to Enable NTP,
you must also set NTP server address.
Specifies the mode for your TE30 to
obtain the Network Time Protocol
(NTP) server IP address.
l Auto: Your TE30 automatically
obtains the NTP server IP address.
l Manual: You must manually set the
NTP server IP address.
This parameter is available only when
Connection type is set to Dynamic
IP.
NOTE
For details about how to set Connection
type, see
Specifies the NTP server IP address.
Quiet: The noise level is minimal, and the rotation speed is slow.
Cozy: The noise level is medium, and the rotation speed is normal.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3.1 Setting IP Parameters.
Table 2-5, choose Advanced Settings > Settings >
2 Installation and Initial Configuration
Setting
The default value is YYYY/
MM/DD.
This parameter is deselected by
default.
The default value is Manual.
No default value is set for this
parameter.
9