Huawei TE30 User Manual page 34

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
RAS
destination
port
Local listen
port
Server listen
port
SIP call port
Local SIP
TLS listen
port
SIP server
TLS listen
port
SIP TLS call
port
Port settings
Audio port
Video port
Step 2 Select Save.
----End
Issue 01 (2013-03-27)
Description
Specifies the port a remote site uses to
send and receive RAS signaling during
communication with your site.
Specifies the SIP listening port for your
site.
Specifies the listening port on the SIP
server with which your TE30 registers.
Specifies the port your TE30 uses to send
SIP signaling during communication with
remote sites.
Specifies the SIP listening port for your
site when Transmission type is set to
TLS.
Specifies the listening port on the SIP
server with which your TE30 registers
when Transmission type is set to TLS.
Specifies the port your TE30 uses to send
SIP signaling during communication with
remote sites when Transmission type is
set to TLS.
Mode for setting and using port resources.
l Normal: Port numbers in use cannot
be changed.
l Port convergence: The port numbers
used in H.323 converge. Specifically,
signals of different formats use the
same port number. This efficiently
saves port resources.
l Same port send/receive: Your TE30
sends and receives data streams
through the same port.
Specifies the port your TE30 uses to
receive audio packets during
communication with remote sites.
Specifies the port your TE30 uses to
receive video packets during
communication with remote sites.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is 1719.
The default value is 5060.
The default value is 5060.
The default value is 5060.
The default value is 5061.
NOTE
For details about how to set
Transmission type, see
Setting SIP Parameters.
The default value is 5061.
The default value is 5061.
The default value is Same port
send/receive.
The default value is 10002.
The default value is 10004.
3 Network
3.3
26