Enabling Web-Based Login; Configuring The Web Browser - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide

11.1 Enabling Web-based Login

After web-based login is enabled, you can log in to the TE30 using its web interface.
Web-based login must be enabled or disabled on the remote controlled UI. For details, see
Supporting Remote

11.2 Configuring the Web Browser

To remotely manage the TE30 using its web interface, configure the web browser on your
computer.
Background
The following procedure uses Internet Explorer 8.0 as an example of how to configure a browser.
The methods for configuring other browser versions are similar.
Procedure
Step 1 Open Internet Explorer 8.0.
Step 2 Choose Tools > Internet Options and select the Security tab.
Step 3 Select Custom level. Then select Enable for all options under Scripting and Downloads.
Step 4 Select OK.
Step 5 Select Trusted sites and then Sites.
The Trusted sites dialog box is displayed.
Step 6 In the Add this website to the zone text box, enter your TE30 IP address. Then select Add.
Step 7 Select Close.
Step 8 Select the Privacy tab. Then move the slider to Medium.
Step 9 Select OK.
The configuration is complete.
----End
To set Firefox, do the following:
Start the Firefox. On the menu bar, choose Tools > Options. On the Main tab, select Show the
Downloads window when downloading a file. On the Privacy tab, select Accept cookies from
sites. Then select OK.
Issue 01 (2013-03-27)
Logins.
NOTE
To ensure that information can be properly displayed, if you choose to skip
Tools > Pop-up Blocker > Turn Off Pop-up Blocker from the menu bar of Internet Explorer.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Web-based Remote Management
Step 5 through Step
10.2.3
7, choose
92