Setting Network Diagnostics Parameters - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide

3.7 Setting Network Diagnostics Parameters

Correct settings for network diagnostics parameters enable you to employ a network diagnostics
tool to diagnose your TE30 using ports.
Procedure
Step 1 Choose Advanced Settings > Settings > Network > Diagnostics. Set the network diagnostics
parameters by referring to
Table 3-7 Network diagnostics parameters
Parameter
Network
diagnostics
H.323 call
port
RAS source
port
RAS
destination
port
SIP call port
Test network
after exiting
conference
Step 2 Select Save.
----End
Issue 01 (2013-03-27)
Table 3-7.
Description
Specifies whether to enable the H.323 call
port, RAS ports, and SIP call port to be
used for network diagnostics. If you select
this parameter, you must also set H.323
call port, RAS source port, RAS
destination port, and SIP call port.
Specifies the port the network diagnostics
tool uses to send and receive call signaling
during communication with your TE30.
Specifies the port your TE30 uses to send
and receive RAS signaling during
communication with the network
diagnostics tool.
Specifies the port the network diagnostics
tool uses to send and receive RAS
signaling during communication with
your TE30.
Specifies the port your TE30 uses to send
SIP signaling during communication with
the network diagnostics tool.
Specifies whether to perform a ping test
after your TE30 exits a conference. Ping
results are recorded in logs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is deselected by
default.
The default value is 1820.
The default value is 1819.
The default value is 1819.
The default value is 5160.
The default value is Enable.
3 Network
27