Huawei TE30 User Manual page 50

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Switch controls
Turn to Mute
Issue 01 (2013-03-27)
Description
Specifies whether audio signals
collected by audio input devices,
excluding the microphone array, are
transmitted to your TE30 when you
turn off the microphone array.
l MIC array only: Your TE30
can receive audio signals
collected by audio input devices,
excluding the microphone array,
when you turn off the
microphone array.
l All audio inputs: Your TE30
cannot receive audio signals
collected by any audio input
devices when you turn off the
microphone array.
To enable your TE30 to receive
audio signals again, perform any of
the following:
l Press the button on the
microphone array to enable this
function.
l Press the microphone button on
the remote control to turn on the
microphone array only or all
audio input devices, depending
on the Switch controls value.
l On the TE30 web interface,
choose Device Control > Audio
Control and select the audio
input ports you want to enable.
l On the remote controlled UI,
choose Advanced Settings >
Settings > Audio > Audio
Input and select the audio input
ports you want to enable.
Specifies whether to mute the
microphone at your site when the
camera rotates to prevent noise
caused by the rotation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Microphone and Speaker
Setting
The default value is MIC array
only.
The default value is Enable.
42