Adjusting The Camera Mounting Bracket - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide

3.3 Adjusting the Camera Mounting Bracket

Before adjusting the camera mounting bracket, ensure that the wheel locks are toggled down if
a wheel rack is used.
Step 1 Align the silkscreen holes corresponding to the HD display size with the rack fixing holes.
l If you are using a 46-inch HD display, align the holes silk-screened with 1 and 1/2/T with
l If you are using a 55-inch HD display, align the holes silk-screened with 1/2/T and 2/T with
Figure 3-9 Adjusting the rack
Step 2 Tighten the screws using a Phillips screwdriver to secure the camera mounting bracket.
----End
Issue 01 (2015-02-12)
NOTICE
the rack fixing holes, as shown in
the rack fixing holes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-9.
3 Installation
21