APPENDICES
Error
Code
900
901
Downloaded from
ManualsNet.com
(5) System errors (900 to 999)
Table 2.9 System Error List (900 to 999)
Control Mode
• When the servo amplifier power is switched
• When the servo amplifier power is switched
search engine
Error Cause
ON, the motor type set in the "system
settings" differs from the motor type actually
installed.
(Checked only when using MR-J2-B)
ON, the motor travel value while the power
was OFF is found to have exceeded the
"Power of Allowed Traveling Points" setting
made in the system settings.
APP − 15
Error
Corrective Action
Processing
• Correct the motor type setting in the
system settings.
Further
operation is
• Check the position.
impossible.
Check the encoder battery.