5.2
Resetting this Product
This product can be reset as a whole or by either of the following functions: Windows function or MELSEC functions
When resetting only either of the functions, it can be reset without affecting the other function(s).
: Can be reset, : Cannot be reset
Operation
Resetting this product as a whole
Resetting the Windows function
Resetting the MELSEC functions
Select an operation according to the function(s) to be reset.
Resetting this product as a whole
Reset this product as a whole when the product is in the error status (such as a hardware failure). For the method, refer to the
following:
Page 187 HARDWARE RESET FUNCTION
Resetting the Windows function
Reset the Windows function when Windows cannot be restarted by the Windows operation because Windows freezes or a
system error occurs.
The MELSEC functions are not reset; therefore, Windows can be restarted without causing any errors in a programmable
controller system.
For the method, refer to the following:
Page 191 Windows Forced Restart
Resetting the MELSEC functions
Reset the MELSEC functions to apply parameters after writing them in CW Configurator.
The Windows function is not reset; therefore, parameters can be applied without shutting down Windows.
For the method, refer to the following:
Page 190 Bus Reset
5 POWER OFF AND RESET
58
5.2 Resetting this Product
Windows function
MELSEC functions