Mitsubishi Electric MELSEC iQ-R Series User Manual page 99

Security
Settings for a setup password are displayed.
Item
Administrator Password
Secure Boot
■Procedure for setting a password
1.
Enter the current password in the "Enter Current Password" screen and press the  key.
The "Create New Password" screen appears.
If no password has been set, the "Create New Password" screen appears. Start from step 2.
2.
Enter a new password in the "Create New Password" screen and press the  key.
The "Confirm New Password" screen appears.
3.
Enter the password set in step 2 in the "Confirm New Password" screen and press the  key.
■Procedure for deleting a password
1.
Enter the current password in the "Enter Current Password" screen and press the  key.
2.
Enter nothing in the "Create New Password" screen and press the  key.
The confirmation screen for deleting the password appears.
3.
Select "Yes" for "Clear Old Password. Continue?" and press the  key.
Description
Set a password to start the BIOS setup.
Follow the rules listed below:
• The number of characters must be between 1 and 20.
• Only alphabets and numbers are available.
• Alphabet characters are not case-sensitive.
Set whether to enable the secure boot.
• Disabled: The secure boot is disabled. (Default)
• Enabled: The secure boot is enabled.
9 MAINTENANCE AND INSPECTION
9.3 BIOS Setup
9
97